News

Granite State Trade School is now offering Online Continuing Education courses in Gas and Plumbing

Granite State Trade School has announced it will now be offering online continuing education course for gas and plumbing. “It took us longer than anticipated to make our continuing education course available online, but we wanted to make sure they had the same quality instruction people have come to expect from us in the live classes.” said Jim Fusco. Course for April and May are now available on the website, with more to follow. Once students register for a course, they will receive an email invitation to access the course. To learn more about the online continuing education courses, call 603-895-4444 or email jim@granitestatetradeschool.com.

Professor Wrench on Electrical Continuing Ed

Hi!
Professor Wrench here to let you know that we now offer Electrical Continuing Education.
We offer the 15 hour Continuing Education Course for electricians that need to stay up-to-date on New Hampshire’s electrical code. We will be holding classes in some onsite locations as well as here at our facility.
Also check out our Facebook page each week to test your knowledge with our Professor Wrench Quiz Questions. If you have a technical question you’d like to submit to Professor Wrench, post them on our page or Click Here. If your question involves installation issues take photos and attach them to so we can offer the proper advice on your issues. We look forward to all of you technicians out there putting up your questions and photos.
Until next time,
Professor Wrench

NH Governor Signs New Mechanical Code Package Into Law

After much debate and a long wait, NH finally will be leaving the 2009 Gas and Plumbing code books and enforcing more recent editions. The new code package set to take effect Sept 8th, 2019 for the gas fitting world includes the 2015 NFPA 54 National Fuel Gas Code and the 2014 NFPA 58 Liquified Petroleum code book. Effective September 15th, NH adopted for plumbers and others in the mechanical trades, the 2015 IPC (plumbing code), the 2015 IMC (mechanical code), and the 2015 IRC (residential code). New code always brings changes so stay in touch with your state and local inspectors as well as Granite State Trade School for updates and important changes.

New Chief Mechanical Inspector

Marc Prindiville has been appointed as the chief mechanical inspector. He was formerly one of the regional inspectors serving the state.

Upcoming classes

NH Plumbing Preparation Course
January 31, 2025
Complete coverage of all materials and the International Plumbing Code. We will prepare you with
NFI Hearth Installers Certification
April 23, 2024
Classes are held from 8 AM to 4 PM. 5-Day course (40 hour requirement) Classroom
Online Gas Continuing Education-April 5
April 5, 2025
Gas Continuing Education-April 5
April 5, 2025

TAKE YOUR CAREER TO THE NEXT LEVEL AT GRANITE STATE TRADE SCHOOL

Certification is a validation of experience, knowledge, skills, abilities, behaviors, and competencies for a particular job or profession. Personal certification is a demonstration of an individual’s knowledge, skills, and abilities in a specific trade or field. Whatever your career objectives are, call Granite State Trade school and start taking your career to the next level.

STAY CONNECTED

Join the GSTS Mailing list and receive the latest on courses and industry information. To be added to our list, please provide complete and accurate information.

By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact